Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Electric sunroof woes

Re: Electric sunroof woes 9 years 9 months ago #6054

  • Mick
  • Mick's Avatar
  • Offline
  • Administrator
  • Posts: 583
  • Thank you received: 18
  • Karma: 40
G'day Jifop, welcome to The Registry :D

From memory, when the roof slides forwards and hits the end of it's travel, these brackets which you refer to to flip forwards to raise the rear of the roof. If these are not assembled correctly the rear of the roof will not raise up. Perhaps these are tightened so that they are solid and do not rotate?

Here is an image I found of mine before I restored it - maybe it will help?



It's hard to explain how these should be assembled, but I actually have my sunroof in pieces at the moment, so if you would like me to take any photos of anything, just give me a holler.

Mick.
The administrator has disabled public write access.

Re: Electric sunroof woes 9 years 9 months ago #6055

  • Mick
  • Mick's Avatar
  • Offline
  • Administrator
  • Posts: 583
  • Thank you received: 18
  • Karma: 40
BTW - IIRC - they should be loose fitting - it's the spring tension that keeps them engaged in the roof. On the picture above there is also a nut missing.

HTH
The administrator has disabled public write access.

Re: Electric sunroof woes 9 years 9 months ago #6056

  • Mick
  • Mick's Avatar
  • Offline
  • Administrator
  • Posts: 583
  • Thank you received: 18
  • Karma: 40
Also - from the parts manual in the library there is an exploded diagram...

The administrator has disabled public write access.

Re: Electric sunroof woes 9 years 9 months ago #6057

  • jifop
  • jifop's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 5
  • Karma: 0
thanks for the photo, I'll take another look at it tonight! the bracket does rotate quite hapily but nothing forces it to flip into position!
The administrator has disabled public write access.

Re: Electric sunroof woes 9 years 9 months ago #6058

  • Mick
  • Mick's Avatar
  • Offline
  • Administrator
  • Posts: 583
  • Thank you received: 18
  • Karma: 40
The other possibility is that the clutch in the gearbox is slipping too much. Normally it should be able to push the bracket causing it to flip (the roof gets to the end of it's travel but the cable keeps going - flipping the bracket). Once everything has reached it's limit there is a clutch in the gearbox that slips to stop any damage being done. If this is slipping too much maybe it does not have enough bite to flip the bracket?
The administrator has disabled public write access.

Re: Electric sunroof woes 9 years 8 months ago #6129

  • Mick
  • Mick's Avatar
  • Offline
  • Administrator
  • Posts: 583
  • Thank you received: 18
  • Karma: 40
I took some photos of the cable ends in my car for you...



Sunroof clip in raised position (closed)




sunroof clip in lowered position (open / opening / closing)




Sunroof clip retracted to allow fitting of sunroof panel

The part that flips moves pretty freely.

HTH
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.062 seconds
Powered by Kunena Forum